Certifications

* Supports 802.11b/g/n, 2T2R 2.4 GHz with 300 Mbit/s PHY data rate

* Supports Wi-Fi APs, AP clients, repeaters, repeater bridges, WDS, and other operating modes (optional)

* Supports WEP, WPA, WPA2 and other encryption schemes, RADIUS authentication, and MAC address filtering

* Supports GPS with separate GPS chips

* Industrial 32-bit communication processor

* 16MB

* 64MB

* Two 10/100 Mbit/s Ethernet ports (RJ45), self-adaptive MDI/MDIX, and built-in 1.5 kV electromagnetic isolation.

* RJ45 socket, built-in RS232 ports (or RS422/RS485), and built-in 15 kV ESD protection. Serial port parameters:

* Data bit：5、6、7、8位

* Stop bit：1、2位

* Check: No check, even parity check, and odd parity check（Optional)

* Serial port rate: 300 to 115200 bits/s

* PWR, VPN, SYS, PPP, BAK, SIG, LAN 1, LAN 2

* ANT 1: 3G/4G diversity antenna, standard SMA female antenna port, and 50 ohm characteristic impedance

* ANT 2: Wi-Fi, standard SMA female antenna port, and 50 ohm characteristic impedance (optional)

* ANT 3: GPS/Wi-Fi, standard SMA female antenna port, and 50 ohm characteristic impedance (optional)

* ANT 4: 3G/4G primary antenna, standard SMA female antenna port, and 50 ohm characteristic impedance

* Standard draw-out user card port, supports 1.8 V/3 V SIM/UIM cards and built-in 15 kV ESD protection

* Standard 3-pin locomotive power socket with built-in reverse phase protection and overvoltage protection

* Restores parameter configurations of the router to factory settings

* DC 12V/1A

* DC 6~35V

* <500ma (12V)

* Metal housing, IP 30 protection Secure isolation between the housing and the system, especially applicable to industrial control sites

* 118 mm x 100 mm x 22 mm (excluding the antenna and installation parts)

* Approximately 357 g

* -25~+65℃（-13~+150℉）

* -30~+75℃（-22~+167℉）

* -40~+85℃（-40~+185℉）

* 95% (non-condensing)